close

Why blue wristbands applicable to games,swirl silicone bracelets

duced appear performance defects and practical function is reduced . Some customer are holding ready-made products for Soft-hardness comparison directly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel will have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness , the higher the defective rate of the products and the pulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high .      

blue wristbands

te rubber wristbands: 1. We should first soak the dry cloth in water and wash it once. Then we can fully screw the water and dry it for 9 minutes with a hairdryer. We should clean both inside and outside the white rubber wristbands. 2. If there is dirt and dust on the white rubber wristbands, we can use a small toothbrush to stick some toothpaste to clean it. If there is grease stain, use toothbrush to stick it. 3. If there is a sticky stain on the wristband such as glue, use a cotton swab to stick on a little wind oil essence and apply it evenly.Material is cleaned with a small toothbrush, so that stubborn stains can be remoswirl silicone bracelets href="https://www.wristbands-australia.com/swirl-silicone-bracelets">swirl silicone braceletsved. 4. Finally, we can use a dry cloth to dry the ring. Dry with a blower and cold air. But we must remember do not use hot air for hair dryer, it will be damaged by silicone material.          being-human-wristbands-buy-onlinewhere-can-i-buy-yellow-wristbands